VAIL 100D 10 ft. x 10 ft. Double-Sided Graphic Package
VAIL 100D 10 ft. x 10 ft. Double-Sided Graphic Package
Description
Description
Vail-100D 10 x 10 ft. Double-Sided Graphic Package. Vail-100D is a double-sided Resort Extrusion with a 100mm wide profile. This extrusion has a solid outside finish. Because the profile width is so thick, VAIL-100D is especially good for free-standing large images (tall or wide) because it is more stable than the skinnier profile widths; however, it can be wall mounted or hung overhead. When installing the fabric graphic, the keter can fit 12mm deep and 3mm wide into the keter trough.
Package Includes:
Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: To make one edge of the frame, take two cut VAIL-100D extrusions and, between, add Split Connector; tighten. Repeat this three times. Take two completed 10' edges and slide in Corner Connector; tighten. Repeat this three times. Connect VAIL-40C to the other; tighten. Vertically insert ends of completed VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector.
Graphic Installation: Transversely, push corners of graphic into the frame's recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 120"W x 120"H x 3.94"D Ideal for a 10' x 10' booth!
Artwork Size: 122"W x 122"H
Shipping Dimensions: (2) boxes 73.25"L x 7.25"W x 6.5"H
Package Includes:
- (1) 4-Sided Frame
- (2) Custom Single-Sided Graphics (SEG hem)
- (4) VAIL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench
- (5) VAIL Split Connectors (1 pre-installed on 1 VAIL-40C), (1) Torx Key
- (2) VAIL Key Locks (pre-installed), (1) 4mm Allen Wrench
- (2) VAIL-40C Support Extrusions
Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: To make one edge of the frame, take two cut VAIL-100D extrusions and, between, add Split Connector; tighten. Repeat this three times. Take two completed 10' edges and slide in Corner Connector; tighten. Repeat this three times. Connect VAIL-40C to the other; tighten. Vertically insert ends of completed VAIL-40C into top and bottom of the frame; tighten.
Upgrade to Replace: VAIL Toolless Corner Connector and VAIL Toolless Split Connector.
Graphic Installation: Transversely, push corners of graphic into the frame's recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides. Repeat on the other side.
Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.
Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 120"W x 120"H x 3.94"D Ideal for a 10' x 10' booth!
Artwork Size: 122"W x 122"H
Shipping Dimensions: (2) boxes 73.25"L x 7.25"W x 6.5"H