A classic in the Resort Extrusion collection, the Aspen SEG Fabric Frame is the perfect blend of versatility and class. Aspen's outside finish has a line groove, like an indented stripe, for added style, but is purposeful for easily installing accessories. This wall mounted option is great for showrooms, retail stores or anywhere needing that extra marketing power.

The Aspen 40D has a profile width of 40mm. (.1.57in.). The outside finish is solid with a groove line in the center of the extrusion. The silicone beading can fit 12mm. (.47 in)deep and 4 mm. (.15 in.) wide into the trough of the frame. Not compatible with lights (cannot be backlit).

Quick Install and Set Up Overview

Remove extrusion and parts out of your packaging. Layout out your pieces. Find one of your "L" Brackets with a screw. Insert one of the corner "L" brackets to the end of one of the extrusion sticks. Tighten the brackets with the Allen Wrench provided. Then repeat with all the corners.

Next you’ll want to pre-drill in your wall mounts (Provided with Graphic Package options). Start with the wall mounts that will hold the top extrusion. Evenly space them out under the top extrusion frame. Don’t forget to level the wall mounts. Once you have your frame and top wall mounts set. Hang the extrusion on top of the wall mounts. Then drill in the remaining wall mounts inside of the bottom extrusion to set in place your frame. Wall mounts will be hidden once you place your graphic on to the frame.
Then place your SEG (Silicone Edge Graphic) Graphics into the frame grooves, keeping a tight and finished look.