Aspen Slim Black Fabric Frames - Wall Mounted 3 Pack (19MM SEG Extrusion)

Walls looking bland? Add an Aspen Slim SEG display to brighten up the space. From showing off photos you've taken to marketing opportunities. Our Aluminum Extrusion is lightweight, making it great for wall mounting.

Once you have your frame mounted to the wall. You can change your graphics anytime. Making it the ideal display to change out seasonal advertising and messaging.

The ASPEN SLIM ONYX has a profile width of 19mm. (.75in.). Making this single-sided SEG extrusion the thinnest of them all. Less than half the profile width of ASPEN-40D, the outside finish is solid black powder coat finish. The silicone beading can fit 12mm. (.47 in)deep and 4 mm. (.15 in.) wide into the trough of the frame. Not compatible with lights (cannot be backlit).

Quick Install and Set Up Overview

Remove extrusion and parts out of your packaging. Layout out your pieces. Find one of your "L" Brackets with screws. Insert one of the corner "L" brackets to the end of one of the extrusion sticks. Tighten the brackets with the Allen Wrench provided. Then repeat with all the corners.

Next you'll want to pre-drill in your wall mounts (Provided with Graphic Package options). Start with the wall mounts that will hold the top extrusion. Evenly space them out under the top extrusion frame. Don't forget to level the wall mounts. Once you have your frame and top wall mounts set. Hang the extrusion on top of the wall mounts. Then drill in the remaining wall mounts inside of the bottom extrusion to set in place your frame. Wall mounts will be hidden once you place your graphic on to the frame.

Then place your SEG (Silicone Edge Graphic) Graphics into the frame grooves, keeping a tight and finished look.

What is SEG?

SEG is short for Silicone Edge Graphics and is a fabric graphic finished with a thin silicone strip. The silicone strip is sewn directly to the edge of the graphic, and the strip is then inserted into a frame with a recessed groove.